FINERFILTERS DO IT YOURSELF Basic fridge water connection- fitting kit. If you are starting from scratch or have recently moved and need to re-plumb your water supply to your fridge, this will be what you need. The Kit consists of. 1 x 15mm push-fit copper pipe adaptor with a ¼” water pipe reducer fitting, to make your initial connection to the water supply,and to connect the 1/4″ water pipe. 5 metres of ¼” John Guest water pipe, plenty-to allow you to be able to pull your fridge out,without putting strain on a short pipe. 1 x 1/4″ x 1/4″ shut off valve, this will enable you to service your appliance, easily shutting off the 1/4″ supply. 1 x ¼” straight connector to join the water pipe that comes from the back of your fridge to your new water pipe. THE 15MM PUSH-FIT CONNECTOR SOLD WITH THIS SYSTEM HAS BEEN TESTED ON, 15mm COPPER, 15MM SPEED-FIT AND 15MM HEP20. A general knowledge of plumbing skills is all you need to fit this product,but if you are at all unsure then please consult a plumber.